Bose Professional PowerShareX PSX2404D Power Amplifier

Description The Bose Professional PowerShareX PSX2404D power amplifier delivers adaptable 4-channel Class D performance with integrated DSP, Dante digital audio networking, and flexible low-impedance or 70V/100V operation. EN 54-16 certified for voice alarm systems, it provides reliable power, advanced loudspeaker processing, and scalable control for professional installed sound applications.FeaturesPower-sharing technology: Dynamically allocates power evenly or asymmetrically across outputs without having to bridge channels or lose channel count when powering Bose Professional loudspeakers.Bose Professional certified presets and ControlSpace Designer integration: Delivers the best performance, loudspeaker protection, and visibility of the entire Bose Professional system from a single UI for easy design, configuration, control, and monitoring.Proven Powersoft reliability: Ensures the systems operate every day, mitigating non-billable service calls.Flexible outputs: Capable of handling either low-impedance (2, 4, 8Ω) or high-impedance (70, 100V) loudspeaker loads.Built-in Dante audio: Supports up to 4 digital input channels from a Dante network eliminating the requirement of ordering and installing an accessory network card.4 analog inputs: Provide line-level source connections.PowerShare Design Tool: A downloadable design tool that allows system designers the ability to choose their PowerShare amp and simulate the power-sharing capability that, in some cases, can lead to a lower-power model requirement and cost savings.GPIO connections: Provide a remote level, on/off, and alarm triggers.Network monitoring: Provides real-time system performance data, minimizing downtime, guesswork, and unnecessary service calls.Rack-friendly 1RU design: That is only 358 mm (14.1 in) deep eliminating the need for oversized racks.EN 54-16 compliant for reliable use in VA/PAVA systems with other compliant system components.ApplicationsCommercial installationsHouses of worshipPerforming artsCorporateHotelsRetail/RestaurantsEducationGovernmentSports & FitnessSpecificationsAmplificationParameterSpecificationNumber of Channels4Power ClassClass DChannel Separation (Crosstalk)-70 dB typical at 1 kHzGain (Low-Impedance)26 dB, 29 dB, 32 dB, 35 dB (selectable)Rated Power, Symmetrical800 W per channel at 2 Ω / 600 W per channel at 4 Ω, 8 Ω, 70V, 100VMaximum Peak Power, Symmetrical1600 W at 2 Ω / 1200 W at 4 Ω, 8 Ω, 70V, 100VRated Power, Asymmetrical1600 W at 2 Ω / 1700 W at 4 Ω / 1300 W at 8 Ω (100V mode) / 1700 W at 70V / 1500 W at 100VMaximum Peak Power, Asymmetrical3200 W at 2 Ω / 3400 W at 4 Ω / 2600 W at 8 Ω / 3400 W at 70V / 3000 W at 100VFrequency Response20 Hz – 20 kHz (±1.0 dB), 1 W at 8 ΩSNR>104 dB (A-weighted)THD N<0.1% (<0.05% typical, 0.1 W to half-power)Audio Inputs – AnalogParameterSpecificationInput Channels4 balanced, lineConnectors(1) 6-pin EuroblockInput Impedance20 kΩMaximum Input Level20 dBuSensitivity3.54 Vrms @ 26 dB gain / 2.51 Vrms @ 29 dB / 1.78 Vrms @ 32 dB / 1.26 Vrms @ 35 dBAudio Inputs / Outputs – DigitalParameterSpecificationDigital Channels4 Dante inputsConnectors(1) RJ-45 Dante inType6-pin EuroblockAudio Outputs – AnalogParameterSpecificationOutput Channels4Connectors(1) 8-pin Euroblock, 7.62 mmIntegrated DSPParameterSpecificationDSP EnabledYesInternal Precision32-bit floating-pointA/D and D/A Converters48 kHz / 24-bitAudio Latency2.5 ms (fixed-latency architecture)Delay2 s (input) 100 ms (output)EqualizationInput: 8-band parametric EQ (±15 dB), notch, shelving, HPF, LPF, array EQ (ArenaMatch), band-pass crossover / Loudspeaker: 9-band parametric EQ (±15 dB), notch, shelvingCrossover TypesButterworth, Bessel, Linkwitz-Riley (up to 48 dB/octave)LimitersPeak voltage, RMS voltage, clipPresetsBose Professional loudspeaker presetsProcessing FunctionsInput EQ, array EQ, loudspeaker EQ, peak & RMS voltage limiters, delay, band-pass, matrix mixerIndicators & ControlsParameterSpecificationFront Panel ControlsPower button, soft reset, hard reset, check button, 4 channel attenuation controlsRear Panel Controls16 output DIP switches (4 per channel), 8 system configuration DIP switchesLED Indicators21 channel meter LEDs, 7 system status LEDs, 2 power status LEDsElectricalParameterSpecificationMains Voltage100–240 VAC (±10%), 50/60 HzMains ConnectorIEC C20 inletCurrent Draw (Idle)0.45 A @ 115 VAC / 0.25 A @ 230 VACAC Power Consumption31.1 W idle / 405 W max at 1/8 power at 4 ΩProtectionsHigh temperature, DC, short circuit, HF, low/high AC voltage, inrush current, clip, peak, long-term/RMSComplianceParameterSpecificationSafetyEN 54-16 certified (voice alarm control and indicating equipment)EMCMeets EN55103-2 immunity requirements (E2 environment)GeneralParameterSpecificationSoftwareControlSpace Designer 5.12 or later (Windows)Computer InterfaceRJ-45 (Ethernet)Notification Outputs(1) 12-pin Euroblock (3 pins per channel)PhysicalParameterSpecificationColorBlackCooling SystemVariable-speed, temperature-controlled fan (front-to-back airflow)MountingRack-mountRack Spaces1UDimensions (H × W × D)19.0 × 1.8 × 14.1 in (483 × 45 × 358 mm)Net Weight15.4 lb (7.0 kg)Shipping Weight22.8 lb (10.3 kg)Included in PackagingItemPowerShareX PSX2404D AmplifierIEC power cordInstallation guide(1) 4-pin Euroblock connector(1) 8-pin Euroblock connector(3) 12-pin Euroblock connectorsT9S4M5E0/00-KMN